What You’ll Be Able to Do (and What You Need First)

Connecting the Xiaomi Smart Band 10 to an iPhone is entirely possible, but it requires specific steps that differ from the Android experience. The app used is not the Mi Fitness directly from the Brazilian store and, depending on the iOS version, you may need to adjust some permissions so everything works stably. If you just unboxed the band and are looking at your iPhone screen unsure where to start, this guide walks you through it from beginning to end.

Before you begin, confirm that you have: an iPhone with iOS 14 or higher (Xiaomi indicates compatibility from this version according to official product documentation), the Mi Fitness app installed (available on the Brazilian App Store), Bluetooth enabled on your iPhone, and a Xiaomi account created. The process takes less than ten minutes in most cases.

Install Mi Fitness and Create Your Xiaomi Account

The first step is to ensure you have the correct app. Xiaomi migrated smartband and smartwatch management to Mi Fitness, replacing the old Mi Fit. If you still have Mi Fit installed, it works in compatibility mode for older devices, but the Smart Band 10 requires Mi Fitness.

1. Open the App Store on your iPhone.
2. Search for Mi Fitness (developer: Anhui Huami Information Technology Co., Ltd).
3. Tap Get and wait for installation.
4. Open the app and tap Create Account if you don’t already have a Xiaomi account. If you do, sign in with your email or phone number.
5. Accept the terms of service and privacy policy. Pay attention to health data permissions: the app will request access to Apple Health, which is optional but allows you to sync steps and calories with other health apps on your iPhone.

An important note: the Xiaomi account is linked to health data stored on the company’s servers. If this is a concern for you, review the privacy settings within the app itself before proceeding.

Enable Bluetooth and Pair the Band

With the app installed and account created, it’s time to physically connect the Smart Band 10 to your iPhone via Bluetooth BLE (Bluetooth Low Energy, a low-power version used by most current wearables, which maintains the connection without significantly draining your phone’s battery).

1. On your iPhone, go to Settings > Bluetooth and confirm it’s enabled.
2. Open Mi Fitness and tap the profile icon (bottom right corner).
3. Tap Add Device or the “+” icon in the top corner of the devices screen.
4. The app will request permission to use Bluetooth. Tap Allow.
5. Put the Smart Band 10 on your wrist and wait for the screen to turn on. If the battery is very low (below 10%), charge it first, as pairing may fail.
6. Mi Fitness will display the Smart Band 10 in the list of nearby devices. Tap on it.
7. A numeric sequence will appear on both the band’s screen and your iPhone. Confirm the numbers match and tap Pair on your iPhone.
8. iOS will display a standard alert asking permission to connect the Bluetooth accessory. Tap Pair again.

After a few seconds, the band vibrates confirming the connection and Mi Fitness displays the device’s home screen with battery, firmware version, and customization options.

Configure Notifications and Sync with Apple Health

The basic connection is done, but the Smart Band 10 becomes much more useful after you configure what really matters: notifications and integration with your iPhone’s health data.

Notifications on Your Wrist

1. Within Mi Fitness, tap the name of the Smart Band 10 on the home screen.
2. Go to App Notifications.
3. Enable the apps you want to receive on your wrist: WhatsApp, Instagram, email, phone, among others.
4. Back on your iPhone, go to Settings > Notifications and confirm that each selected app has permission to display alerts. Mi Fitness can only forward notifications that iOS already allows.

Apple Health Integration

1. In Mi Fitness, go to Profile > Settings > Privacy and Data.
2. Tap Apple Health and enable syncing.
3. iOS will open the Apple Health screen asking which data you authorize Mi Fitness to read and write. Select steps, calories, heart rate, and sleep according to your preference.
4. Confirm with Allow.

This integration is especially useful if you use other health apps on your iPhone, such as Apple’s own Health app or workout applications, because data from the Smart Band 10 will now appear centralized.

Adjust Health Monitoring and Watch Faces

With a stable connection, take a few minutes configuring what the sensor does during the day. According to Xiaomi’s official technical sheet, the Smart Band 10 includes continuous heart rate monitoring, SpO2 (blood oxygen saturation, measured by light reflected by the optical sensor on the back of the band) and stress tracking, plus automatic sleep tracking.

1. In Mi Fitness, tap the Smart Band 10 and access Health Settings.
2. Enable Continuous Heart Rate Monitoring and set the interval (every 1 minute is most accurate but uses more battery).
3. Enable SpO2 Detection During Sleep if you want nighttime data.
4. To change the watch face, tap Watch Faces within the device settings. Mi Fitness offers a gallery with free and paid options for direct download to your band.

If you want to better understand what the Smart Band 10 delivers in terms of battery life and sensors, check out the complete Xiaomi Smart Band 10 review we published with all the technical specifications details.

Common Issues and How to Fix Them

The Band Doesn’t Appear in the Mi Fitness List

First, check if the Smart Band 10 is not already paired with another phone. Each band accepts connection with one device at a time. To reset, hold the touch button on the side of the band for about 5 seconds (or follow the path Settings > About > Factory Reset directly on the band) and try again.

The App Crashes During Sync

Close Mi Fitness completely, go to Settings > Bluetooth, locate the Smart Band 10 in the “My Devices” list, and tap Forget This Device. Then reopen the app and restart the pairing process from scratch.

Notifications Arrive on iPhone but Don’t Vibrate on the Band

Check if your iPhone has Do Not Disturb mode active, as this blocks forwarding. Also confirm that the source app has notification permission on iOS and is in the active list within Mi Fitness. In some cases, restarting the band (holding the button for 3 seconds) resolves occasional sync failures.

Mi Fitness Doesn’t Ask for Apple Health Access

Go to iPhone Settings > Privacy and Security > Apple Health > Mi Fitness and check if permissions are granted manually. iOS sometimes skips the automatic popup if the app was installed without a stable internet connection.

The Band Frequently Loses Connection

This usually happens when your iPhone has background app refresh restrictions. Go to Settings > General > Background App Refresh and enable it for Mi Fitness. It’s also worth reviewing your iPhone’s battery saver settings, which can suspend connectivity apps.

Frequently Asked Questions About Connecting Xiaomi Smart Band 10 to iPhone

Does the Smart Band 10 Work Without Your Phone Nearby?

Yes, the band records data locally (steps, heart rate, sleep) even when not connected to your iPhone. Syncing happens automatically when Bluetooth is restored. However, notifications and music controls depend on an active connection with your phone.

Do I Need to Keep Mi Fitness Open All the Time?

No. Once configured, Mi Fitness runs in the background on iOS and syncs data periodically. The important thing is to ensure the background app refresh permission in your iPhone settings, as mentioned in the common issues section.

Is the Smart Band 10 Approved by Anatel?

Anatel approval is mandatory for any device with a radio transmitter sold legally in Brazil. Units marketed by official national resellers should have the seal. If you imported directly or bought from an unauthorized reseller, check the approval number on the back of the device or packaging, as its absence can cause warranty issues and, technically, legal use concerns. Always check on Anatel’s website using the certification number.

Can I Use the Smart Band 10 with Two Phones at the Same Time?

No. Pairing is exclusive to one device at a time. To switch phones, you need to unlink the band from the app on the old phone (or perform a factory reset on the band) and pair again on the new one.

Price and Where to Buy in Brazil

The Xiaomi Smart Band 10 was launched internationally at a reference price around US$39 in the United States, according to public launch information. In Brazil, the price range varies considerably depending on the channel: official stores and major national retailers usually practice prices between R$250 and R$380, while parallel imports may appear cheaper but without local warranty and potentially without Anatel approval. If you’re considering other bands in the same segment, it may be useful to compare with alternatives from other manufacturers available in Brazil before deciding. For those also evaluating audio gadgets in this budget range, the comparison between JBL Tune 770NC and Sony WH-CH720N for home office shows how cost-benefit can vary greatly depending on use. Prices change frequently, so confirm the current price directly with the retailer before purchasing.